Model ERS6FX2TX

8 Port Rack-mount Switch

6 x 100FX  + 2 x 10/100TX

This layer 2 switch has been designed for great flexibility at a very reasonable price. 100FX fiber for Port 1 to 6 (6 ports), and 10/100TX copper for Port 7 to 8 (2 ports). The FX ports can be SC single-mode (35 km or higher) or muti-mode (2 km) ST or SC. Dual speed Cu ports allow you to leverage existing technology without investment in software and personal training.

Optional management via console for VLAN, QOS, Trunking and a number of report functions.

Fast Ethernet was designed in order to ensure cost effective, simple migration from 10 Mbps to 100 Mbps while maintaining the Ethernet transmission protocol, Carrier Sense Multiple Access Collision Detection (CSMA/CD). Dual speed products offer the ability to leverage your existing network investment.

• 100FX Ports 1 through 6. 10/100TX  Ports 7 to 8.
• Console port management interface
• Supports Port Based VLAN
• QOS (Quality of Service) Supports 2 queues
• For Voice over IP applications
• Fiber Ports can be Single (SC) or Multi Mode ST or SC
• Auto Negotiation for 10/100TX, Full/half Duplex & crossover
• Wire speed Receive & Transmission
• Will recognize up to 2048 MAC addresses
• Supports packets to 1522 bytes
• Broadcast Storm Protection
• Made in the USA 

Agency Approvals &

Standards Compliance

EMI FCC Class A & CE Mark

Bandwidth

1.8 Gbps backplane, Wire speed reception & transmission

Broadcast storm protection

Cabling

10/100 UTP Category 5, maximum cable distance 100 meters

10/100/1000 UTP Cat. 5e or Cat. 6

100 mbps Fiber: Single Mode or Multi Mode

Multi Mode: 50/125 or 62.5/125, 1310 nm (50 to 100 microns)

to 2 km.

Single Mode: 9/125, 1310 nm (8.3 to 10 microns) to 35 km

Connectors: Total 10

DB9 for console management (Optional)

IEC for main power cord

Ports 1 through 6: Customer choice: ST or SC multi-mode fiber or SC single-mode fiber modules.

Ports 7 through 8: 10/100TX RJ45

Dimensions, Packaging

Height  1.75” (45 mm)

Depth  4.26” (109 mm) not inc. connectors

Width  17.0” (430 mm)   

Environmental

Operating Temperature

Storage Temperature

Relative Humidity

32 to 122 F (0 to 50C)

-4 to 140F (-20 to 60 C)

5% to 90% (non-condensing)

Flow control

Half Duplex. Back pressure.

LED Indicators, Total 29

1 for power, 3 each for ports 1 through 8.

MAC addresses

Look up engine supports 2048 different addresses

Automatic learning, address aging & address migration

Network Speed

Copper 10/100  Half/Full Duplex Auto Negotiating

Fiber 100FX Full Duplex

Network Standards

IEEE802.3 Ethernet

IEEE802.3u Fast Ethernet

IEEE802.3ac VLAN tagging

IEEE802.1Q VLAN

IEEE802.3ad Link Aggregation Control Protocol

IEEE802.1D Spanning Tree Protocol & Traffic Priorities

IEEE802.1p Priority tags

IEEE802.1s Multiple Spanning Tree Protocol

IEEE802.1w Rapid Spanning Tree Protocol

IEEE802.1x Port Authentication

IEEE802.3x Flow control pause

Performance

2 Gigabit switching capacity

64 byte packet forwarding rate: 35.7 Mbps

12K x 64 SRAM

Packet length to 1522 bytes

Forwarding & filtering at non-blocking full wire speed

Voltage and Current ratings

Nominal input voltages:

Input voltage range:

Input Frequency:

Maximum input current:

Power Consumption:

110 - 230VAC RMS

100- 240VAC RMS

50/60Hz

1.2A at 110VAC, 0.6A at 230VAC      70 W (max)

Weight

4 lbs. 6 oz         

Shipping Weight:

7 lbs. 8 oz

Warranty

Limited 5 Year Hardware Warranty

Ordering Information

ERS6FT2TX

ERS6FC2TX

ERS6FS2TX

8 Port Switch with 6xPort (1-6) 100FX ST (MM) & 2xPort (7-8) 10/100TX Cu RJ45.

8 Port Switch with 6xPort (1-6) 100FX SC (MM) & 2xPort (7-8) 10/100TX Cu RJ45.

8 Port Switch with 6xPort (1-6) 100FX SC (SM) & 2xPort (7-8) 10/100TX Cu RJ45.