EMB11

FX-100 Fiber to 10/100TX

Features

Switch/Media Converter

·        Plug & play simplicity

·        Half/full duplex auto-negotiating on TX port

·        Half/full duplex switch on FX port

·        10/100 auto sensing on RJ45 port

·        5.6 Gbps switch fabric integrated on chip

·        Flow control for reliable communications during full-duplex operation

·        ST, SC or MTRJ fiber connectors

·        Multimode or single mode

(2 Km. or 55 Km)

·        Internal or external power supply

·        Stand-a-lone or Rack-mount

·        Designed & manufactured in the USA

·        Compact rugged steel enclosure

Overview

Description

EtherCom’s EMB11 10/100TX to 100BaseFX switch/media converter is an exceptionally small, stand-alone unit, designed to allow the network designer to add fiber segments as needed.

With external or internal power, stand-a-lone or rack-mount, single-mode or multi-mode, EtherCom offers the ultimate in flexibility 

The EMB11 10BaseT or 100BaseTX to 100BaseFX media converter, allows 10BaseT or 100BaseTX specifications to be used over fiber cable.

Designed to meet the needs of today’s network planers to integrate both 10 & 100 Mbps Ethernet performance with the benefits of fast fiber segments, The EMB11 complies with the 100BaseTX 802.3u standard.

8 LEDs for easy monitoring..

A wall mount 12 VDC power supply is supplied with the unit and is available for ether 110 or 230 VAC.

The very small foot print 2” x 4.5”  (4 x 10 cm) & the handy screw-mounting flange make for easy & flexible installation.

EtherCom Corporation

1409 Fulton Place,   Fremont,   CA  94539, USA

Tel.   (510) 440 0242 International + 1510 440 0242

Fax. (510) 659 8296 International + 1510 659 8296

www.ethercom.com

Network Standards

Speed

100BaseFX Multimode

100BaseFX single mode

Power Requirements

LEDs

Weight

Dimensions

Environmental

Ethernet IEEE 802.3u

TX: 10/100 Mbits/Sec.

FX:100 Mbps

Wavelength:

Optical Output Power:

Optical Input Power:

SC Connector

Wavelength:

Optical Output Power:

Optical Input Power:

SC Connector

Input Voltage;

Output Voltage;

EMB11-Z

Total 8

EMB11-X or Y

power supply for above

EMB11-Z

EMB11-X or Y

(Including flange)

EMB11-Z

Operating Temperature

Storage Temperature

Relative Humidity

Half /full duplex, auto-negotiating

Half /full duplex, manual switch

1310 nm

Min. -22 dBm    Max. -14 dBm

Min. -30 dBm    Max. -14 dBm

1310 nm

Min. -35 dBm    Max. -33dBm

Min. -36 dBm    Max. -34 dBm

110 or 230 VAC, wall mount power supply

12 VDC, 1.0 amp Power Cube included

70 to 270 VAC universal internal power Supply

1 for unit power, & Collision, Full Duplex, Link/Activity & 10 or 100 for RJ45 Port Plus Collision, full duplex & Link/Activity for Fiber Port.

0.418 lbs.     0.190 kg.

1.269 lbs.     0.576 kg.

0.823 lbs.     0.373 kg

3.3 x 2.1 x 0.8 inch (8.5 x 5.4 x 2.0 cm)

4.5 x 2.1 x 0.8 inch (10.5 x 5.4 x 2.0 cm)

4.2 x 3.5 x 1.2 inch (12.5 x 8.9 x 3.0 cm)

32 to 122F (0 to 50 C)

-4 to 140F (-20 to 60 C)

5% to 80% (non-condensing)

Connectors

Cabling

Regulatory Approvals

Warranty

1 Fully Shielded RJ45 connectors. Choice of SC ST or MTRJ Fiber Connectors External Power Module Connector on EMB11- X or Y.

Standard IEC connector on EMB11-Z

UTP Category 5, maximum cable distance 100 meters

Fiber maximum cable distance 2 Km. multi mode 15 Km single mode

EMI FCC Class A & CE.

5 years

Ordering Information

Type of Power Supply

Fiber Type

Connectors

EMB11-

X: 110V External Power Supply

MM:  Multi-Mode Fiber

T:  ST

Y: 230V External Power Supply

SM:  Single-Mode Fiber

C:  SC

Z: Internal Universal Power Supply.

LM:  Long Distance Fiber

J:   MTRJ